To Next Page
P
perezjosephJul 28, 2025
How to troubleshoot an extinguished Input Power LED on a Qlogic SANbox 5600 Switch?
- MMarcus EvansJul 28, 2025
If the Input Power LED is extinguished on your Qlogic Switch, check the power source and connections.
How to troubleshoot an extinguished Input Power LED on a Qlogic SANbox 5600 Switch?
If the Input Power LED is extinguished on your Qlogic Switch, check the power source and connections.
General| Model | SANbox 5600 Series |
|---|---|
| Form Factor | 1U |
| Switch Type | Fibre Channel |
| Supported Protocols | Fibre Channel |
| Management Interface | Web-based GUI, CLI, SNMP |
| Port Speed | 1 Gbps, 2 Gbps |
| Fabric Type | Fibre Channel |
| Hot Swappable | Yes |
| Redundancy | Dual power supplies, hot-swappable |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Humidity | 10% to 90% non-condensing |
