Need help?Do you have a question about the Qlogic SANbox 5802V and is the answer not in the manual?
General| Model | SANbox 5802V |
|---|---|
| Device Type | Fibre Channel Switch |
| Management Interface | Ethernet |
| Hot-swappable Components | Power supplies, fans |
| Power Supply | Dual redundant, hot-swappable |
| Management | CLI |
Details security features like SNMP and In-band management.
Step-by-step guide for replacing a malfunctioning switch.
Displays and allows filtering of events generated by switches.
Viewing and managing details and user-defined names for connected devices.
Dividing the fabric into zones for controlled communication.
Displays current network and switch configuration information.
Creating, modifying, and removing user accounts for switch access.
Procedures for rebooting a switch with its configuration.
Setting up switch chassis, network, and SNMP parameters.
Configuring IP addressing, DNS, and network properties.
Setting up SNMP parameters, traps, and security.
Loading archived configuration parameters onto a switch.
Resetting switch and port settings to their factory defaults.
Loading and activating firmware images on the switch.
Displaying and changing port settings like speed and type.
To Next Page
