QMAXZ Lighting QS250S - Table of Contents

QS series manual v3.09 QMAXZ © 2009
- 2 -
TABLE OF CONTENTS
1. Introduction Page 3
2. Unpacking Page 3
3. Safety information Page 3
4. Rigging the fixture Page 4
5. Lamp replacement Page 5
5.1 Lamp installation Page 6
5.2 Lamp adjustment Page 6
6. Power and Signal connection Page 7
6.1 AC Power Page 7
6.2 Fuse replacement Page 7
6.3 Signal connection Page 8
6.4 Fixture start up Page 9
7. Fixture function menu Page 9
7.1 Function menu navigation Page 9
7.2 Function menu QS250S Page 10
7.3 Function menu QS250W Page 16
7.4 Menu Functions Page 21
7.5 RDM Functions Page 22
7.6 Software update Page 22
7.7 Control channels DMX Page 23
8. Gobo and gobo size Page 24
8.1 Fixed metal gobos Page 24
8.2 Rotating glass gobos Page 24
8.3 Gobo positions Page 25
8.4 Gobo replacement Page 25
9. Maintenance Page 26
10. QS-series technical data Page 27
10.1Technical data Page 27
10.2 Photometric data Page 27
10.3 Dimensional drawings Page 28
11. DMX Protocol Page 29
11.1 QS250S Page 29
11.2 QS250W Page 32
12. Troubleshooting Page 34
13. Info Page 35