QOLSYS IQ SMART PLUG QZ2101-840 User Manual

Dimensions: 43MM x 43MM x 45MM
!
Input Voltage: 110-230VAC 50/60HZ
Max Current: 13A!
Rated Input Current:!
10A, 110-230V, 50/60Hz Continuous load current!
16A, 110-230V, 50/60Hz Instantaneous load current
Operating Temperature: 32°F~104°F
Storage Temperature: 32°F~140°F!
Range: Up to 195’ outdoors, Up to 98’ indoors
DESCRIPTION
IQ SMART PLUG QUICK INSTALL GUIDE
SPECIFICATIONS
The Smart Plug is an intelligent device that
can be controlled remotely. Monitor voltage,
current, instant power or accumulated power
from your smart device.
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
LEARN
INTO
PANEL
STEP
1
Plug Smart Plug into an
outlet close to the panel
Select “Add Device" under
Z-Wave device installation
Press the button three times in
1.5 sec to “enroll” the device
PLEASE NOTE: PAIRING THE IQ SMART PLUG NEAR THE IQ PANEL IS FOR CONVENIENCE ONLY. ONCE IQ SMART PLUG HAS
BEEN SUCCESSFULLY PAIRED IT CAN BE MOVED ANYWHERE WITHIN ACCEPTABLE RANGE (APPROX 100 FEET OPEN AIR)
x3

QOLSYS IQ SMART PLUG QZ2101-840 Specifications

General

Product Name	Qolsys IQ Smart Plug
Category	Home Automation
Model Number	QZ2101-840
Wireless Protocol	Z-Wave
Power Input	120V AC, 60Hz
Maximum Load	15A
Frequency	908.42 MHz
Operating Temperature	0°C to 40°C
Compatibility	Z-Wave certified devices
Power Rating	1800W

Summary

Product Specifications

Installation Step 1: Learn Into Panel

Plug Smart Plug into Outlet

Plug the smart plug into an outlet close to the panel.

Add Device Selection

Select "Add Device" under Z-Wave device installation.

Device Enrollment Process

Press the button three times in 1.5 sec to "enroll" the device.