EasyManua.ls Logo

QPIX PS970H - User Manual

QPIX PS970H
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
QPIX PS970H 4-in-1 Scanner
QUICK USER GUIDE
Caution
Read This Guide
Before Using
Part A
Operate the scanner
with a SD card
1. Insert a SD memory card into
the scanner’s memory card slot.
2. Connect power to your QPIX
PS970H scanner via UBS cable
to AC power adapter. Press
Power button to turn on power.
Scanning film or slides
3. Push both the silver levers to
“Film Scanner” position
4. The default setting of this
scanner is for FILM.
Incorrect settings will NOT
deliver proper scan results.
Press “Mode” and Press or
until "Film" appears on the
screen. Press "Enter" to enter
film type selection submenu,
press or to choose your
film type to be scanned (film,
slide, black&white). Press
"Enter" to confirm.
5. Load your film or slides
onto the corresponding film or
slide holder. Insert the holder
into the slot. Adjust holder
position to ensure the image
appears on the screen
properly. Press “Scan” to scan
the image. You will be
prompted to save or abandon
the scanned image. If you
choose to save, the image will
be automatically saved on
your SD memory card.
Scanning photos
6. Push both the silver
levers to “Photo Scanner”
position.
7. According to the size of
your photo, fit brackets to
appropriate positions on the
photo holder for the size of
your photo. Place your
photo onto the photo holder.
Ensure that the left, right
and bottom edges of your
Question and Answer IconNeed help?

Do you have a question about the QPIX PS970H and is the answer not in the manual?

Summary

Operate the Scanner with an SD Card

Scan Film or Slides

Steps to scan film or slides, including setting mode, film type selection, and loading.

Scan Photos

Steps to scan photos, including setting mode, fitting brackets, loading, and scanning.

Operate the Scanner Without an SD Card

Connect Scanner via USB

Connect the scanner to a computer via USB and select USB connection mode.

Scan to Internal Memory

Scan images and save them to the scanner's internal memory.

Access Scanned Files

Access and retrieve scanned image files from the scanner's internal memory.

QPIX PS970H Specifications

General IconGeneral
InterfaceUSB 2.0
Scanning TechnologyCIS (Contact Image Sensor)
Color Depth48-bit
Grayscale Depth16-bit
Scan Speed (Black & White, A4, 300 dpi)Approx. 5 sec
Maximum Document Size216 x 297 mm (A4)
Power Consumption (Operation)2.5 W
Operating System CompatibilityWindows XP/Vista/7
Optical Resolution600 x 600 dpi

Related product manuals