QSC AcousticDesign AD-S6T - Adjust X-Mount Bracket Angle

4
EN
TD-000329-00-C
Adjust the Angle of the X-Mount™ Bracket
Refer to — Figure 5
NOTE: This step may be done now or after mounting the loudspeaker.
1. Use a 5mm hex wrench to loosen the adjustment locking screws.
2. Orient the bracket as necessary.
3. Tighten the adjustment locking screws.
— Figure 5 —
~
~ +/-70º
-15° +30°
+/-40º
5 mm
Not available
on AD-S6T
~
~ +/-60º (AD-S6T)
SIDE TOP FRONT