To Next PageTo Next Page
Need help?Do you have a question about the QSC K series and is the answer not in the manual?
General| Series | K Series |
|---|---|
| Type | Powered Loudspeaker |
| Woofer Size | 8" (K8), 10" (K10), 12" (K12) |
| Tweeter Size | 1.4" |
| Input Connectors | XLR |
| Output Connectors | XLR |
| Max SPL | 132dB (K12) |
Details the K8, K10, K12 loudspeakers and KSub subwoofer models.
Explains critical safety symbols and provides numbered safety instructions for operation.
Outlines QSC's 3-year limited warranty terms for products sold in the USA.
Provides information on FCC rules and potential radio frequency interference.
Lists items included with K8, K10, K12, and KSub loudspeaker systems.
Details the features of the K8 loudspeaker, including enclosure, grille, and mounting points.
Details the features of the K10 loudspeaker, including enclosure, grille, and mounting points.
Details the features of the K12 loudspeaker, including enclosure, grille, and mounting points.
Details the features of the KSub subwoofer, including enclosure, port, and casters.
Describes various uses for K Series in live sound reinforcement and as floor monitors.
Explains pole mounting, suspension, and pairing K Series with the KSub.
Provides safety guidelines for rigging and specific pole length limits when used with KSub.
Illustrates recommended placements for K8, K10, K12 with KSub on poles.
Details integrated suspension points and cooling requirements for installed applications.
Instructions for connecting and disconnecting AC power using IEC sockets and V-LOCK cords.
Explains the function of the power switch and various LED status indicators.
Guidelines for proper power-on and power-off sequencing to avoid audio artifacts.
Details MIC/Line input via XLR/1/4" jack, MIC/LINE selector, and gain control.
Details Line Level input via XLR/1/4" jack and RCA jacks, and gain control.
Explains balanced and unbalanced input connectors and proper wiring.
Describes line level inputs for Channel A/B, signal summing, gain, and signal LED.
Details direct XLR outputs and the post-gain mixed line output with warnings.
Describes discrete direct XLR outputs for Channel A and Channel B.
Covers Excursion Limiting, DEEP, and Intrinsic Correction DSP technologies.
Explains NORM, EXT SUB, and DEEP settings for low-frequency response.
Details FLAT and VOCAL BOOST settings for high-frequency response.
Guidance on setting subwoofer polarity for optimal bass response.
Explains the automatic standby feature and associated LED indicators.
Details the functionality of the front power LED and rear limit LED.
Describes the 3-pin connector for adjusting volume and entering standby mode.
Provides schematics for wiring potentiometers for single or multiple loudspeakers.
Illustrates how to connect various audio sources to the K Series inputs.
Shows how to connect K Series outputs to other devices or speakers.
Depicts different output connection scenarios for daisy-chaining or stereo setups.
Diagram for a basic mono system with a single loudspeaker and audio sources.
Diagram for a stereo system using multiple loudspeakers for left and right channels.
Provides detailed measurements (height, width, depth) for the K8 loudspeaker.
Provides detailed measurements (height, width, depth) for the K10 loudspeaker.
Provides detailed measurements (height, width, depth) for the K12 loudspeaker.
Provides detailed measurements (height, width, depth) for the KSub subwoofer.
Lists technical specifications for the K8 loudspeaker.
Lists technical specifications for the K10 loudspeaker.
Lists technical specifications for the K12 loudspeaker.
Lists technical specifications for the KSub subwoofer.
Provides mailing address, telephone numbers, and website for QSC Audio Products.
