QSC DCA Series - Table of Contents

3
TABLE OF CONTENTS
INTRODUCTION
Introduction and description of each model.................................4
CONFIGURING THE ACCESSORIES
General configuration information, all models...............................5
XC-3
Setting up the XC-3....................................................................6
Factory-installed SIPs..........................................................6
Factory-switch settings.........................................................7
Recommended amplifier settings......................................7
LF-3
Setting up the LF-3....................................................................8
Factory-installed SIPs..........................................................9
Factory switch settings.........................................................9
Recommended amplifier settings......................................9
SF-3
Setting up the SF-3....................................................................10
Factory-installed SIPs.........................................................11
Factory switch settings.........................................................11
Recommended amplifier settings......................................11
MOUNTING TO AMPLIFIER...............................................12
APPLICATION EXAMPLE......................................................................13
WARRANTY INFORMATION.........................................14
HOW TO CONTACT QSC AUDIO PRODUCTS ....................15
Illustrations: Setup flow chart, XC-3 front and rear, delay and crossover SIP
selection charts, SIP identifier chart, and HF boost response curve.
Illustrations: Setup flow chart, LF-3 front and rear, delay and crossover SIP
selection charts, SIP identifier chart.
Illustrations: Setup flow chart, SF-3 front and rear, low-pass/high-pass SIP
selection chart, SIP identifier chart.