Need help?Do you have a question about the QSC PLX 1202 and is the answer not in the manual?
General| Power Output (8 Ohms) | 300W |
|---|---|
| Signal-to-Noise Ratio | > 100 dB |
| Voltage Gain | 32 dB |
| Input Connectors | XLR, 1/4" TRS |
| Output Connectors | Binding posts, Speakon |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | <0.05% |
| Input Impedance | 20 kΩ |
| Cooling | Fan-cooled |
| Dimensions (H x W x D) | 3.5 in x 19 in x 14 in |
| Power Requirements | 120V AC, 60Hz |
Explains warning symbols and provides safety advice for amplifier operation.
Regulatory compliance statements for the PLX Series amplifiers.
Description of front and rear panel components, controls, and indicators.
Explanation and usage of the amplifier's clip limiter feature.
Compares Stereo, Parallel Input, and Bridge Mono modes.
Instructions for installing the amplifier in a standard audio rack.
Details on connecting signal sources and speaker loads.
Guide to powering on, gain controls, and LED indicators.
Wiring diagrams for sound reinforcement and instrument amplification.
Solutions for audio, noise, and distortion problems.
Explanation of internal technology and detailed technical specifications.
Details on product warranty and customer support contact.
To Next Page
