QSC Q-SYS NC Series - Connections and Controls (NC-12 x80 and NC-20 x60 PTZ) - Front Panel; Front Panel Controls and Indicators

5
TD-001654-01-A
Connections and Controls (NC-12x80 and NC-20x60 PTZ)
Front Panel
1
2
1. Status LED (Green)
• Off indicates the camera is in standby mode; network streams are off.
• On indicates the camera is streaming video over the network.
• Blinking indicates the ID mode is on.
2. Power LED (Blue)
• On indicates the camera has power applied.
• Off indicates the camera has no power applied.