QSC TouchMix-16 - Page 15

TouchMix Self-Guided Tour 15
FX 2, which is set for a Lush Reverb.
• Use the Master Encoder (Image 5.5) to adjust
the level of the eect.
We now have reverb on our channel!
Now let’s make some ne adjustments to
our reverb:
• Touch the Reverb icon (Image 5.4) next to the
slide fader to access its parameters.
• Select a parameter by touching the
corresponding knobs.
• Use the Master Encoder (Image 5.5) to adjust
the FX parameters (press and turn for ne
adjustment.)
You can Save your FX Settings as a Custom
FX Preset by pressing “Presets” (Image 5.6)
at the top of the screen and following the same
instructions outlined in the Presets segment of
our walkthrough.
A video overview of Eects is also available for you
to enjoy online at:
5. EFFECTS (Cont’d)
Image 5.4
Image 5.5
Image 5.6