TouchMix Self-Guided Tour 24
begin your recording
After recording, you can listen back to any or all
of your recorded tracks!
To listen back to tracks that have been recorded:
• Press the “Arm” (Image 8.7) button to unarm
the tracks that were previously recorded.
• Touch the “Track” toggle-switch (Image 8.8)
above the Arm button to set those channels
for playback.
The Arm button will disappear and the “Track”
button will turn green indicating that the channel is
set for playback (Image 8.9).
8. RECORDING (Cont’d)
Image 8.8
Image 8.7
Image 8.9
To Next Page
Loading...
