Rev. 3-11
21
10. Return of Equipment
It is suggested that an Ultrasonic Processor in need of repair be sent back to the factory.
In order to receive prompt service; always contact your Customer Service Representative
before returning any instrument. Include date of purchase, model number and serial number.
Please obtain a Return Authorization Number prior to returning the instrument.
Care should be exercised to provide adequate packing to insure against possible damage in
shipment. The Ultrasonic Processor should be sent to the “Service Department” with all
transportation charges prepaid and return of shipment indicated.
Important
The user must certify that the ultrasonic processor and/or the accessories returned for repair are
free of any biohazardous or radioactive material and are safe for handling.
Do not return any equipment unless such a certification can be made.
To Next Page
Loading...
Need help?
General
