Need help?Do you have a question about the Qtel ADSL WiFi Router and is the answer not in the manual?
General| Wireless Frequency | 2.4GHz |
|---|---|
| Antenna type | External |
| DHCP server | Yes |
| WiFi Standard | 802.11b/g |
| Ethernet Ports | 4 x 10/100 Mbps |
| Wireless Security | WPA/WPA2, WEP |
| Firewall security | SPI |
| Model | Qtel ADSL WiFi Router |
Power on the router and connect your computer via network cable for initial setup.
Access the router's web interface to start configuring the internet connection.
Configure connection type, VPI/VCI, and enter user credentials for internet access.
Enter access credentials, wait for configuration, and check LED indicators for status.
Verify the internet connection status on the router's web interface.
Introduction to changing wireless network name (SSID) and security settings.
Navigate to the wireless configuration section via the router's interface.
Change SSID, enable WEP encryption, and set WEP key for wireless security.
To Next Page