Step 9: Enter the user credentials (common for all users).
User name = Administrator
Password = connect2th
Click on Next
Step 10: Please wait until the device is configured “Configuring your Thomson
Gateway” “Please wait …”.
Wait until the window shows “Completing the Thomson Gateway easy Setup”
Click on Finish to close the set-up.
Step 11: To verify the configurations, connect the Thomson TG585 v 7 ADSL2+
Router to DSL line. There are 5 LED on front side of the CPE which denote the
following:
• 1
st
LED denotes POWER ON
• 2
nd
LED denotes Ethernet connection
• 3
rd
LED denotes WiFi
• 4
th
LED denotes ADSL line status
• 5
th
LED denotes successful Internet connectivity
Verify 1
st
, 4
th
and 5
th
LED are glowing.
To Next Page
Loading...
Need help?
General