FIXTURE OR
SCANNER #
FIXTURE OR
SCANNER #
DEFAULT DMX STARTING
ADDRESS
DEFAULT DMX STARTING
ADDRESS
BINARY DIPSWITCH SETTINGS
SWITCH TO THE ON POSITION
BINARY DIPSWITCH SETTINGS
SWITCH TO THE ON POSITION
1
13
2
14
3
15
4
16
5
17
6
18
7
19
8
20
9
21
10
22
11
23
12
24
1
193
17
209
33
225
49
241
65
257
81
273
97
289
113
305
129
321
145
337
161
353
177
369
1
1,5
1,6
1 ,5,6
1,7
1 ,5,7
1 ,6,7
1 ,5,6,7
1,8
1 ,6,8
1,5,6,8
1,7,8
1,5,7,8
1,6,7,8
1,5,6,7,8
1,9
1,5,9
1,6,9
1,5,6,9
1,7,9
1,5,7,9
1,6,7,9
1,5,6,7,9
1 ,5,8
DMX 512 CONTROLLER SERIES
3.1.2 FIXTURE ADDRESSING3.1.2 FIXTURE ADDRESSING
The is programmed to control 16 channels of DMX per fixture, therefore the fixtures you
wish to control with the corresponding buttons on the unit, must be spaced 16 channels
apart.
Controller
SCANNER
Please refer to your individual fixture s manual for DMX addressing instructions. The table above
refers to a standard 9 dipswitch binary configurable device.
3.1.3 PAN AND TILT CHANNELS3.1.3
Because not all intelligent lighting fixtures are alike or share the same control attributes,
the allows the user to assign the wheel the correct pan and tilt channel for
every individual fixture
Controller
Action :Action :
1) Press and hold &
different DMX channel. Faders are given
a channel buttons together (1) time to
access the number and are labeled on the
surface of the channel assignment mode.
PROGRAM TAPSYNC
2) Press a button or
button that represents the fixture whose
faders you would like to reassign.
SCANNER
PAGE SELECT
Notes :Notes :
All pan/tilt can be reassigned to output on a
different DMX channel.
Press AUTO/DEL buttons to delete the channel
assignment mode.
USER MANUAL
7/18
To Next Page
Loading...
Need help?
General