9 9
AvDir(AUX2)
AV Bypass mode for AUX2 , the gain of the AUX2 audio path is set to fixed level
output (0dB). This is for use with sources with build in volume control such as AV processors.
AvDir(AUX2)
Off
AvDir(AUX2)
On
Output Level
For the setting “Adjustable”, the output volume can be adjustable as normal use.
For the setting “Fixed”, the gain of all the input audio paths are set to fixed level output (0dB).
The setting is defaulted with “Adjustable”.
Output Level
Adjustable
Output Level
Fixed
The Output Gain feature apply an offset value (adjustable between -8dB to +8dB) to the volume control.
The offset allow the volume control to be used in its optimal range (in terms of step resolution), accommodating
the use of various types of loudspeakers with different sensitivity levels.
To Next Page
Loading...
