Quadivator HyperCut RD62 - HyperCut Mower Pre-Delivery Check List

HyperCut Mower Pre-Delivery Check List
Check off all items as they are found satisfactory or after adjustments
are made:
 All safety shields and guard are securely in place!
 All decals are in place and readable!
 Tighten all hardware – see Checking Bolt Torque in Service Section.
Check and tighten blade holder and blade bolts – see Tightening Blade and Blade Holder
Hardware in Service Section.
 Check the belt is adjusted properly – see Service Section.
To help prevent personal injury from
rotating blades or thrown objects, never
walk or stand in line with the discharge
du
rin
g
r
u
n-in
o
r
ope
r
at
i
o
n!
CAUTION
Start the HyperCut Mower and allow it to run for 5 – 10 minutes, check for excessive
operation or unusual noise.
The HyperCut Mower has been tested and to the best of my knowledge, is ready to be
delivered to the customer!
Date Pre-Delivered –
Signature –