CAUTIONS WHEN CHARGING
1. Please keep this product in a dry, ventilated area away from any heat source or explosive product.
2. Please remove the battery from the quadcopter. Only charge under the supervision of an adult.
3. After flying, do not charge the battery until the battery has cooled down in order to avoid a swollen battery and
a fire hazard.
4. Please use the provided USB charging cable to avoid damaging the battery.
5. When not used for a long time, a battery can lose its charge. Avoid charging too often to maximize battery life.
1. Install the landing skids to the bottom of the quadcopter, then lock screws (Figure 1).
2. Install the blade protecting frame to every corner, then lock screws (Figure 2).
The remote features two built in modes, Mode 1 and
Mode 2. To change modes, flip the “B” button and
then restart the remote.
Operation Instructions
Push the throttle up or down to make the
quadcopter fly up or down
Push the direction lever up or down to make the
quadcopter fly forward or backward.
Push the throttle left or right to make the
quadcopter turn left or right.
Push the direction lever left or right to make the
quadcopter fly to the left side or the right side.
Charging time:90-100 minutes, Playing time 5.5-6.5 minutes
INSTALLING LANDING SKIDS AND PROTECTIVE FRAMES
CONTROLLER MODES
Sideward flying
Forward and backward
Turn left and right
Hover up and down
To Next Page
Loading...
Need help?
General
