SLU0 / KLU0 Series Use r’s Manual
Chapter 5
Driver Installation
If your ECX-SLU0 / KLU0 Series does not come with an operating system
pre-installed, you will need to install an operating system and the necessary drivers
to operate it. After you have finished assembling your system and connected the
appropriate power source, power it up using the power supply and install the desired
operating system.
You can download the drivers for the ECX-SLU0 / KLU0 Series from the Quanmax
website at www.quanmax.com and install as instructed there. For other operating
systems, please contact Quanmax.
NOTE
When the system reboots without connecting the CRT, there might be no
image on screen when you insert the CRT/VGA cable. Please
press ing <Ctrl>+<Alt>+<F1> simultaneously to show the image on screen.
To Next Page
Loading...
