ABOUT THE SYSTEM SYSTEM REAR VIEW
1-8
Power Sub-System
Figure 1-6. PSU to Mainboard Module Description
A single power supply unit (default) and power distribution board (PDB) are supplied in
the system. A secondary PSU is available for redundacy functionality.
Table 6: System Rear I/O Defintition
NO.ICON NAME DESCRIPTION
1 OCP connector OCP debug connector (optional)
2VGA connector
Maximum display resolution: 1920x1200 32bpp@60Hz
(reduced blanking)
3 COM port A DB9 port (Serial_A) for debug or terminal concentrator
4NIC2 RJ45 connector
5NIC1 RJ45 connector
6 Dedicated NIC Dedicated RJ45 connector
7 USB ports USB ports (2.0 / 3.0)
Table 7: Power Supply Units by Model
PSU AC INPUT
2 x 750W high efficiency redundant PSU 100-240V AC 50/60Hz
To Next Page
Loading...
