QUANTA D51BV-2U - 3.2 BMC Recovery

BMC BMC RECOVERY
3-8
3.2 BMC Recovery
This section provides guidelines on BMC recovery process in DOS and Linux systems.
Recovery Process in DOS System
To recover BMC on a DOS system, do as follows:
1. Copy BMC firmware package to your USB key.
2. Boot into DOS.
3. Run dos.bat.
The BMC recovery is complete.
Recovery Process in Linux System
To recover BMC on a Linux system, do as follows:
1. Copy BMC firmware package to your USB drive.
2. Boot into Linux.
3. Run linux.sh.
The BMC recovery is complete.
Recovery Process in Windows System
To recover BMC on a Windows system, do as follows:
1. Copy BMC firmware package to your USB key.
2. Boot into Windows.
3. Run win.bat.
The BMC recovery is complete.