QUANTA QSSC-S99K 2U - Page 40

VT100 Supported Escape Sequences







UTF8/ANSI Supported Escape Sequences













Note: Reset key function need to press “Ctrl”, “Shift” and “–“ at the same time.
Processor Configuration
For S99K 2U, only identical processors should be installed in system. S99K 2U is 2-socket boards which may have 1 or 2
processors installed. When a single processor is installed, it must be installed into CPU Socket 0, and only DIMM sockets
on memory channels corresponding to CPU Socket 0 may be used.
Chapter 3 — BIOS
Key Escape Sequence
Up <ESC> [<Shift>a
Down <ESC> [<Shift>b
Right <ESC> [<Shift>c
Left <ESC> [<Shift>d
Home <ESC> [<Shift>h
End <ESC> [<Shift>k
F1 <ESC><Shift>op
F2 <ESC><Shift>oq
F3 <ESC><Shift>or
F4 <ESC><Shift>os
Key Escape Sequence
F1 <ESC>1
F2 <ESC>2
F3 <ESC>3
F4 <ESC>4
F5 <ESC>5
F6 <ESC>6
F7 <ESC>7
F8 <ESC>8
F9 <ESC>9
F10 <ESC>0
F11 <ESC>!
F12 <ESC>@
Home <ESC>h
End <ESC>k
Ins <ESC>+
Del <ESC>-
Alt <ESC>^A
Ctrl <ESC>^C
Page Up <ESC>?
Page Down <ESC>/
Reset <Ctrl> <Shift> -
32