Memory Configuration
DIMM population
For three slots per channel configuration, the Tylersburg-EP platform requires DIMMs within a channel to be populated
starting with the DIMMs farthest from the processor in a “fill-farthest” approach. In addition, when populating a
quad-rank DIMM with a Single- or Dual-rank DIMM in the same channel, the Quad-rank DIMM must be populated
farthest from the processor. Note that Quad-rank DIMMs are not allowed in three slots populated configurations. All
allowed DIMM population configurations for three slots per channel are shown in below tables.
Chapter 3 — BIOS
33
To Next Page
Loading...
