EasyManua.ls Logo

QUANTA QSSC-S99K 2U - Page 47

Default Icon
177 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Intel® Virtualization Tech Access Level 1
Execute-Disable Bit Capability Access Level 1
Intel® HT Technology Access Level 1
Active Processor Cores Access Level 1
Intel® SpeedStep™ tech Access Level 1
Intel® TurboMode tech Access Level 1
Intel® C-STATE tech Access Level 1
C3 State Access Level 1
C6 State Access Level 1
NUMA Support Access Level 1
S99K 2U supports Nehalem-EP and Westmere-EP processors.
For detail description about hardware support, please refer to HW SPEC.
Memory Configuration
*1: Auto/ 800 Mhz/ 1066 Mhz
*2: Independent/Channel Mirroring/Lockstep
*3: Disable/Enabled
Control Group User Access Level
Memory Frequency Access Level 1
Memory Mode Access Level 1
Throttling - Closed Loop Access Level 1
Throttling - Open Loop Access Level 1
Chapter 3 — BIOS
39
Advanced
BIOS Setup Utility
pppppppOptionspppppp
Forces a DDR3
Frequency slower than
the common tCK
detected via SPD
Select Screen
↑↓ Select Item
-+ Change Option
F1 General Help
F10 Save and Exit
ESC Exit
System Memory Settings
----------------------------------------------------
Current Memeory Frequency 1066MHz
Memory Frequency [Auto]*1
Memory Mode [Independent]*2
Throttling – Closed Loop [Enabled]*3
Throttling – Open Loop [Enabled]*3
v02.66 © Copyright 1985-2009, American Megatrends, Inc.

Related product manuals