QUANTA QSSC-S99K 2U - Page 48

IDE Configuration
*1: Disabled/Compatible/Enhanced
*2: IDE/RAID/AHCI
*3: Disabled/Enabled
*4: 0/5/10/15/20/25/30/35
Control Group User Access Level
SATA Configuration Access Level 1
Configure SATA#1 as Access Level 1
SATA Port0 Access Level 3
SATA Port1 Access Level 3
SATA Port2 Access Level 3
SATA Port3 Access Level 3
SATA Port4 Access Level 3
SATA Port5 Access Level 3
Hard Disk Write Protect Access Level 1
IDE Detect Time Out (Sec) Access Level 1
HDD Security Erase Support Access Level 1
Chapter 3 — BIOS
40
Advanced
BIOS Setup Utility
pppppppOptionspppppp
Disabled
Compatible
Enhanced
← Select Screen
↑↓ Select Item
-+ Change Option
F1 General Help
F10 Save and Exit
ESC Exit
IDE Configuration
----------------------------------------------------
SATA Configuration [Enhanced]*1
Configure SATA#1 as [IDE]*2
► SATA Port0 : [Hard Disk]
► SATA Port1 : [Not Detected]
► SATA Port2 : [Not Detected]
► SATA Port3 : [Not Detected]
► SATA Port4 : [Not Detected]
► SATA Port5 : [Not Detected]
Hard Disk Write Protect [Disabled]*3
IDE Detect Time Out (Sec) [35]*4
HDD Security Erase Support [Disabled]*3
Advanced
BIOS Setup Utility
Disabled: Disables LB
A
Mode.
Auto: Enables LBA Mode if
the device supports it and
the device is not already
formatted with LBA Mode
disabled.
← Select Screen
↑↓ Select Item
-+ Change Option
F1 General Help
F10 Save and Exit
ESC Exit
SATA Port1
----------------------------------------------------
Device : Hard Disk
Vendor : ST320410A
Size : 20.0GB
LBA Mode : Supported
Block Mode : 16Sectors
PIO Mode : 4
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-2
S.M.A.R.T : Supported
----------------------------------------------------
Type [Auto]*1
LBA/Large Mode [Auto]*2
Block (Multi-Sector Transfer) [Auto]*2
PIO Mode [Auto]*3
DMA Mode [Auto]*4
S.M.A.R.T. [Auto]*5
32Bit Data Transfer [Enabled]*6
v02.66
©
Co
py
ri
g
ht 1985-2009, American Me
g
atrends, Inc.
v02.66
©
Co
py
ri
g
ht 1985-2009, American Me
g
atrends, Inc.