IPMI 1.5 / 2.0 Command Support List
This chapter lists all IPMI 1.5 / 2.0 mandatory and option command support. For more detailed information please refer to
core IPMI commands Support document. In the following section, if the command support is the same as listed inside core
IPMI commands support document, detail description will be skipped. Things listed here is only the different part.
GUID FLOW CHART
Device GUID is the GUID stored in EEPROM to represent BMC. System GUID is the GUID stored in EEPROM & BIOS
CMOS to represent the system. If the GUID stored in BIOS CMOS is different from the one stored in EEPROM, the one
stored in BIOS CMOS must been replaced by the one stored in EEPROM. Furthermore, if BMC is not working, Get System
GUID will return the value stored in BIOS CMOS, otherwise always returns the value stored in EEPROM.
IPMI Device Global Commands
Command NetFn CMD O/M Supported?
Get Device ID App 01h M Yes No
Cold Reset App 02h O Yes No
Warm Reset App 03h O Yes No
Get Self Test Results App 04h M Yes No
Manufacture Test On App 05h O Yes No
Set ACPI Power State App 06h O Yes No
Get ACPI Power State App 07h O Yes No
Get Device GUID App 08h O Yes No
Broadcast Commands
Broadcast ‘Get Device ID’ App 01h M Yes No
Chapter 4 — BMC
78
To Next Page
Loading...
