BMC Device and Messaging Command
Table: BMC-System Interface Commands
Command NetFn CMD O/M Supported?
Set BMC Global Enables App 2Eh M Yes No
Get BMC Global Enables App 2Fh M Yes No
Clear Message Buffer Flags App 30h M Yes No
Get Message Buffer Flags App 31h M Yes No
Enable Message Channel Receive App 32h O Yes No
Get Message App 33h M Yes No
Send Message App 34h M Yes No
Read Event Message Buffer App 35h O Yes No
Get BT Interface Capabilities App 36h M Yes No
Get System GUID App 37h M Yes No
Get Channel Authentication
Capabilities
App 38h M
Yes No
Get Session Challenge App 39h M Yes No
Activate Session Command App 3Ah M Yes No
Set Session Privilege Level Command App 3Bh M Yes No
Close Session App 3Ch M Yes No
Get Session Information App 3Dh M Yes No
Get Authentication Code Command App 3Fh O Yes No
Set Channel Access Commands App 40h M Yes No
Get Channel Access Commands App 41h M Yes No
Get Channel Info Command App 42h M Yes No
Set User Access Commands App 43h M Yes No
Get User Access Commands App 44h M Yes No
Set User Name Commands App 45h M Yes No
Get User Name Commands App 46h M Yes No
Set User Password Commands App 47h M Yes No
Active Payload Command App 48h M Yes No
Deactivate Payload Command App 49h M Yes No
Get Payload Activation Status App 4Ah M Yes No
Get Payload Instance Info Command App 4Bh M Yes No
Set User Payload Access App 4Ch M Yes No
Get User Payload Access App 4Eh M Yes No
Get Channel Payload Support App 4Fh M Yes No
Chapter 4 — BMC
79
To Next Page
Loading...
