Command NetFn CMD O/M Supported?
Get Channel Payload Version App 50h M Yes No
Master Write-Read I2C App 52h M Yes No
Get Channel Cipher Suites App 54h O Yes No
Suspend/Resume Payload Encryption App 55h O Yes No
Set Channel Security Keys App 56h O Yes No
Get System Interface Capabilities App 57h O Yes No
BMC Watchdog Timer Commands
Command NetFn CMD O/M Supported?
Reset Watchdog Timer App 22h M Yes No
Set Watchdog Timer App 24h M Yes No
Get Watchdog Timer App 25h M Yes No
Chassis Commands
Command NetFn CMD O/M Supported?
Get Chassis Capabilities Chassis 00h M Yes No
Get Chassis Status Chassis 01h M Yes No
Chassis Control Chassis 02h M Yes No
Chassis Reset Chassis 03h O Yes No
Chassis Identify Chassis 04h O Yes No
Set Chassis Capabilities Chassis 05h O Yes No
Set Power Restore Policy Chassis 06h O Yes No
Get System Reset Cause Chassis 07h M Yes No
Set System Boot Options Chassis 08h M Yes No
Get System Boot Options Chassis 09h M Yes No
Set Front Panel Button Enable Chassis 0Ah M Yes No
Set Power Cycle Interval Chassis 0Bh M Yes No
Get POH Counter Chassis 0Fh O Yes No
Chapter 4 — BMC
80
To Next Page
Loading...
