FRU Inventory Device Commands
Command NetFn CMD O/M Supported?
Get FRU Inventory Area Info Storage 10h M Yes No
Read FRU Inventory Data Storage 11h M Yes No
Write FRU Inventory Data Storage 12h M Yes No
Sensor Device Commands
Command NetFn CMD O/M Supported?
Get Device SDR Info S/E 20h O Yes No
Get Device SDR S/E 21h O Yes No
Reserve Device SDR Repository S/E 22h O Yes No
Get Sensor Reading Factors S/E 23h O Yes No
Set Sensor Hysteresis S/E 24h O Yes No
Get Sensor Hysteresis S/E 25h O Yes No
Set Sensor Threshold S/E 26h O Yes No
Get Sensor Threshold S/E 27h O Yes No
Set Sensor Event Enable S/E 28h O Yes No
Get Sensor Event Enable S/E 29h O Yes No
Re-arm Sensor Events S/E 2Ah O Yes No
Get Sensor Event Status S/E 2Bh O Yes No
Get Sensor Reading S/E 2Ch M Yes No
Set Sensor Type S/E 2Dh O Yes No
Get Sensor Type S/E 2Eh O Yes No
Set Sensor Reading and Event Status S/E 2Fh M Yes No
LAN Command
Command NetFn CMD O/M Supported?
Set LAN Configuration Parameters
(Note: Parameter 9 and 25 are not
supported.)
Transport 01h M
Yes No
Get LAN Configuration Parameters
(Note: Parameter 9 and 25 are not
supported.)
Transport 02h M
Yes No
Suspend BMC ARP Transport 03h O Yes No
Get IP/UDP/RMCP Statistics Transport 04h O Yes No
Chapter 4 — BMC
82
To Next Page
Loading...
