LAN Configuration Parameters
Parameter # Parameter Data (non-volatile otherwise noted)
Set In Process 0
Byte 1 – This bit
[7:2] – Reserved
[1:0] – 00b Set Complete
01b Set In Process
10b Commit Write
11b Reserved
Authentication Type Support (read only) 1
Byte 1
[7:6] Reserved
[5:0] Authentication Type support
[5] Reserved
[4] Straight password
[3] Reserved
[2] MD5
[1] MD2
[0] Reserved
Authentication Type Enable 2
Byte 1 Call back level
[7:6] Reserved
[5:0] Authentication Type support
[5] Reserved
[4] Straight password
[3] Reserved
[2] MD5
[1] MD2
[0] Reserved
Byte 2 User level
Same as byte 1
Byte 3 Operator level
Same as byte 1
Byte 4 Administrator level
Same as byte 1
Byte 5 Reserved
IP address 3 Byte 1:4 IP address MSB first
IP address source 4
Byte 1
[7:4] Reserved
[3:0] Address source
0h Reserved
1h Reserved
2h Reserved
3h BIOS or SMS
4h Reserved
MAC address 5 Byte 1:6 MAC address MSB first
Subnet Mask 6 Byte 1:4 Subnet Mask, MSB first
Chapter 4 — BMC
83
To Next Page
Loading...
