Quantum DXi V1000

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 105
E0623 Failed to read/get option "namematch".
E0624 Failed to write/set option "namematch".
E0650 Restricted shell: Filename cannot contain '/'; it must be in
current working directory!
E0700 Program syscli does not have the setuid-on-execution bit set.
E0701 User does not have admin privilege to run this command.
E0702 User does not have viewing privilege to run this command.
E0703 User credential expired. User needs to login again.
E0704 User credential is invalid.
E0705 Unknown username.
E0706 User credential cache was not found.
E0707 User credential is not cacheable.
E0708 User credential is never initialized (programmer's error).
E0709 User credential is unknown (cannot be determined).
E0710 User credential cache is ambiguous and unuseable!
E0711 User unsupported.
E0712 User does not have the admin privilege to change/reset
password.
E0720 Session expired. User needs to login again
E0721 User needs to log on first
E0722 User needs to re-log on because the session has expired
E0730 Credential invalid (NULL).
E0731 Credential token invalid.
E0732 Credential ID invalid.
E0733 Failed to encrypt credential token.
E0734 Missing credential token after option --credtoken!
E0735 Option --credtoken <credential_token> must be specified
explicitly to the command!
E0740 Credential not found or already expired. User needs to login
again!
E0741 Error reading credential.
E0742 Error writing credential.
E0743 Cannot remove credential.
Error Code Error Message