Need help?Do you have a question about the Quantum Superloader 3 and is the answer not in the manual?
General| Product Type | Tape Autoloader |
|---|---|
| Number of Tape Drives Installed | 1 |
| Number of Cartridge Slots | 8 |
| Tape Technology | LTO Ultrium |
| Data Compression Ratio | 2:1 |
| Native Capacity | 12 TB |
| Compressed Capacity | 24 TB |
| Interfaces | SAS |
| Humidity | 20% to 80% non-condensing |
| Operating Temperature | 10°C to 35°C |
| Supported Media | LTO-5, LTO-4 |
Covers initial steps before installation, including unpacking and ESD precautions.
Details the steps for connecting the SuperLoader to a host system via SCSI.
Explains the procedure for connecting power and turning on the SuperLoader.
Guides through configuring network settings like IP address and subnet mask.
Describes how to set and manage administrator and operator passwords for security.
Guides the user through loading a cartridge into the SuperLoader.
Introduces the web-based interface for remote administration and control.
Details the web interface for system configuration options.
Provides initial troubleshooting steps before seeking external help.
Offers guidance on how to contact Quantum support for assistance.
Explains the process for returning the SuperLoader or its parts for service.
Describes how to identify and interpret errors using system logs.
Details the types and meanings of SuperLoader-specific error logs.
Explains the logs related to the tape drive's performance and errors.
To Next Page
