Quantum Superloader 3 User Manual

Chapter 5 Troubleshooting
To Pack the SuperLoader
142 SuperLoader User’s Guide
Figure 95 Removing
the Brackets
7 Place the SuperLoader into the original packaging box. If you no
longer have the original packaging, contact your service
representative to purchase the packaging kit.
To Pack the SuperLoader 5
Use the original packing material to pack the SuperLoader: the shipping
container, two foam insert packing pieces, the accessory kit box (or the
filler tube if your SuperLoader did not come with an accessory kit box),
and the antistatic bag. You will also need packing tape.
SuperLoader bracket
Screws
SuperLoader (SDLT model)

Quantum Superloader 3 Specifications

General

Product Type	Tape Autoloader
Number of Tape Drives Installed	1
Number of Cartridge Slots	8
Tape Technology	LTO Ultrium
Data Compression Ratio	2:1
Native Capacity	12 TB
Compressed Capacity	24 TB
Interfaces	SAS
Humidity	20% to 80% non-condensing
Operating Temperature	10°C to 35°C
Supported Media	LTO-5, LTO-4