Chapter 5 Troubleshooting
A408: Directory Write
SuperLoader User’s Guide 197
A408: Directory Write 5
Directory write provides information as to why the DLT tape drive was
not successful in writing a directory to the media. If a drive fails to write a
good directory the next drive to load the tape may log an A407 Event, and
it may have excessively long response times to a space or locate SCSI
command.
Figure 113 Directory
Write Block Descriptor
Note: This event will not occur on SDLT tape drives.
Long
Word
Byte 03 Byte 02 Byte 01 Byte 00
1
Called Mode
2
Format
3
Flags Status Status 2 Status 3
4
5
Media ID
6-20
To Next Page
Loading...
