Appendix D Regulatory Statements
Grounding Methods
SuperLoader User’s Guide 259
Grounding Methods 4
There are several methods for grounding. Use one or more of the
following methods when handling or installing electrostatic-sensitive
parts:
Use a wrist strap connected by a ground cable to a grounded workstation
or computer chassis. Wrist straps are flexible straps with a minimum of
1 mega-ohm 10 percent resistance in the ground cords. To provide proper
ground, wear the strap snug against the skin.
Use heel straps, toe straps, or boot straps at standing workstations. Wear
the straps on both feet when standing on conductive floors or dissipating
floor mats.
Use conductive field service tools.
Laser Safety 4
The bar code reader is a Class 1 laser product (per EIC 60825). This laser
complies with 21 CFR 1040.10 and 1040.11.
Taiwan Battery Recycling Label 4
The Taiwan EPA requires dry battery manufacturing or importing firms
in accordance with Article 15 of the Waste Disposal Act to indicate the
recovery marks on the batteries used in sales, giveaway or promotion.
Contact a qualified Taiwanese recycler for proper battery disposal.
øÈï³ò®ôëüÞâ¥
To Next Page
Loading...
