Chapter 2 Installation and Configuration
Setting Ethernet
SuperLoader User’s Guide 41
To Set a Time Server: 2
1 On the main menu, scroll to
Configuration, then press Enter.
Figure 33 Main Menu
(LCD)
2 On the Configuration menu, scroll to Ethernet, then press Enter.
3 On the Ethernet submenu, scroll to
Set Time Server, then press Enter.
The cursor automatically appears at the first digit.
Figure 34 Setting a
Time Server
4 At each position of the time server address, use the up and down
arrows to change the value of each digit. Press
Enter to advance the
cursor to the next digit.
5 When you have advanced through all of the digits of the IP address,
the SuperLoader displays
Enter to save.
6 Press
Enter. Time Server changed to appears on the display. You do not
need to reboot the SuperLoader.
7 Press
Escape or Enter to return to the Ethernet submenu.
Note: If you make a mistake, press
Escape to backspace to the
digit you want to change.
Status
Commands
Configuration
Diagnostics
Time Server Address
192.005.041.041
To Next Page
Loading...
Need help?
General
