Chapter 2  Installation and Configuration
Setting Ethernet
36 SuperLoader User’s Guide
Figure 26  Static IP 
Selection
5 At each position of the IP address, use the up and down arrows to 
change the value of each digit. Press 
Enter to advance the cursor to 
the next digit.
6 When you have advanced through all of the digits of the IP address, 
the SuperLoader displays 
Enter to save.
7 Press 
Enter. The Configuration submenu appears and the static IP is 
now in effect. You do not need to reboot the SuperLoader.
8 Press 
Escape or Enter to return to the Ethernet submenu.
Note: If you make a mistake, press 
Escape to backspace to the 
digit you want to change.
DHCP
Static IP
010.050.021.018