Quantum Superloader 3 - Figure 92 Removing the Superloader from the Rack; Figure 93 Loosening the Support Brackets

Chapter 5 Troubleshooting
How to Return the SuperLoader for Service
140 SuperLoader User’s Guide
To Remove the SuperLoader from the Rack: 5
1 Loosen the four screws that connect the two support brackets to the
two SuperLoader brackets.
Figure 92 Removing
the SuperLoader from
the Rack
2 Loosen the four screws on the front of the SuperLoader that attach
the two front tabs (support brackets) to the front rails. Do not remove
the screws completely at this time.
Figure 93 Loosening
the Support Brackets
3 Remove the four screws at the back of the SuperLoader that connect
the support brackets (two screws per bracket) to the SuperLoader
brackets.
SuperLoader
Rear rail
Disconnect support
bracket to
SuperLoader bracket
bracket
Front rail
Front tab