Quantum Superloader 3 User Manual

Chapter 3 Tape Cartridge Use
Tape Drive Cleaning Methods
68 SuperLoader User’s Guide
Figure 52 Media
Compatibility Chart
SDLT 220 SDLT 320 SDLT 600
300
|
36
110
|
11
160
|
16
Super DLTtape II Super DLTtape I
Cleaning Tape III
DLT VS DLT VS160
SDLT Cleaning Tape
Cleaning Tape Key
Super DLTtape II Super DLTtape I DLTtape VS1 DLTtape IV DLTtape IIIXT DLTtape III
DLT 2000XTDLT 2000 DLT 4000 DLT 7000 DLT 8000 DLT VS160 SDLT 220 SDLT 320 SDLT 600DLT VS80
DLT1
DRIVES
MEDIA
20
|
1.5
35
|
5
40
|
6
40
|
3
300
|
36
15
|
1.5
110
|
11
10
|
1.25
160
|
16
80
|
8
Optimum performance sample: The SDLT 600 uses Super DLTtape II, and has a native capacity of 300GB at 34 MB/sec transfer rate. Compatibility sample: Start at the arrow below the drive and move left: •
SDLT 600 is read compatibile with
Super DLTtape I media written by the SDLT 320 and SDLT 220.
•
SDLT 320 using Super DLTtape I reads
data written by SDLT 220 and writes in SDLT 220 mode.
Key
Optimum drive and media in shaded areas Native capacity (GB) and transfer rate (MB per sec) Compatibility information is found by starting at arrows Read only compatible indicator Read and write compatible indicator

Quantum Superloader 3 Specifications

General

Product Type	Tape Autoloader
Number of Tape Drives Installed	1
Number of Cartridge Slots	8
Tape Technology	LTO Ultrium
Data Compression Ratio	2:1
Native Capacity	12 TB
Compressed Capacity	24 TB
Interfaces	SAS
Humidity	20% to 80% non-condensing
Operating Temperature	10°C to 35°C
Supported Media	LTO-5, LTO-4