Quantum Superloader 3 User Manual

Appendix A Basic Information Logs
SuperLoader Logs
230 SuperLoader User’s Guide
SuperLoader Logs 1
The SuperLoader generates seven types of logs. The following sections
describe the first six types:
• Soft Logs
on page 236
• Update Logs
on page 236
• Shadow Event Log
on page 236
• Boot Logs
on page 237
• OEM Logs
on page 237
• ID Logs
on page 237
The last type of log, Hard Error logs, are used for troubleshooting
purposed and described in chapter 5, Troubleshooting
.
You can retrieve and view each of the six log types through different
methods. Table 36
shows the ways in which you can retrieve each log
type.
Table 36 Log
Retrieval Methods
Log Type http Front Panel SCSI
Soft Yes Yes No
Update Yes Yes No
Shadow Yes No No
Boot Yes No No
OEM Yes No Yes
ID Yes No Yes
Hard Yes Yes Yes

Quantum Superloader 3 Specifications

General

Product Type	Tape Autoloader
Number of Tape Drives Installed	1
Number of Cartridge Slots	8
Tape Technology	LTO Ultrium
Data Compression Ratio	2:1
Native Capacity	12 TB
Compressed Capacity	24 TB
Interfaces	SAS
Humidity	20% to 80% non-condensing
Operating Temperature	10°C to 35°C
Supported Media	LTO-5, LTO-4