Quantum Superloader 3 User Manual

Chapter 4 SuperLoader Operation
Front Panel Menus
72 SuperLoader User’s Guide
Figure 53 SuperLoader
DLT Menu Tree
Structure
Status Commands Configuration Diagnostics
Eject
Tape to Mail Slot
By Barcode
By Location
From Drive
Right Magazine
Left Magazine
Enter (Mail Slot)
To Drive
To Location
Move
Inventory
Enter Password
Operator
Administrator
Log Out
Cleaning Tape
Load to Drive
Unload from Drive
Enter Cleaning Tape
Eject Cleaning Tape
Sequential Ops
Start
Resume
Stop
Home
AutoLoader
Status
Version
Element Status
Drive
Status
Version
Ethernet
SCSI ID
Ethernet
Set IP
DHCP
Static IP
Set Subnet Mask
Set Gateway
Set SNMP Server
Set Time Server
Time
Set Timezone
Set Date/Time
Change Mode
Random
Mixed
Sequential
Seq Cycle Mode
Cleaning Tape
Auto Clean
Tape Location
Magazines
Both
Left
Right
Compression
Security
Security
Set Password
Operator
Administrator
System Update
Error Logs
Hard
Soft
Update
Halt Test
Self Test
Health Check
Picker Test
Magazine Test
Inventory Test
Drive Read Test
Drive Write Test
Drive Read/Write
Sales Demo

Quantum Superloader 3 Specifications

General

Product Type	Tape Autoloader
Number of Tape Drives Installed	1
Number of Cartridge Slots	8
Tape Technology	LTO Ultrium
Data Compression Ratio	2:1
Native Capacity	12 TB
Compressed Capacity	24 TB
Interfaces	SAS
Humidity	20% to 80% non-condensing
Operating Temperature	10°C to 35°C
Supported Media	LTO-5, LTO-4