EasyManua.ls Logo

Quantum Scalar i80 User Manual

Quantum Scalar i80
404 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User’s Guide
Quantum Scalar
i40 and Scalar i80
6-66545-06 Rev A

Table of Contents

Other manuals for Quantum Scalar i80

Questions and Answers:

Quantum Scalar i80 Specifications

General IconGeneral
Power supply typeAC
Power requirements100 – 240V, 50/60Hz
Power consumption (typical)200 W
Dimensions (WxDxH)445 x 793 x 264 mm
Media types supported2x LTO-4
Maximum supported storage capacity128 TB
Storage temperature (T-T)-40 - 60 °C
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Media typeTape Cartridge
Form factor6U
Product typeStorage auto loader & library
CertificationIEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product colorBlack
Standard interfacesFiber Channel
Weight and Dimensions IconWeight and Dimensions
Weight23800 g

Summary

Chapter 1 Description

Library Components

Details the physical parts of the library, including the front panel, robotic system, magazines, power supply, SCB, and tape drives.

Chapter 2 Unpacking the Library

Chapter 3 Understanding the User Interface

Web Client

Describes how to access and use the library's web-based interface for remote management and operations.

Chapter 4 Configuring the Library

Using the Setup Wizard

Guides users through the initial library configuration process via a step-by-step wizard.

Configuring Network Settings

Explains how to set up network parameters like IP address, DHCP, DNS, and host name for remote access.

Chapter 5 Advanced Reporting

Working with Control Path Failover (CPF)

Explains how to configure a secondary tape drive for automatic failover in case the primary control path fails.

Chapter 6 Performing Library Operations

Logging In

Provides instructions on how to access the library via the operator panel or web client, including first-time login.

Shutting Down, Restarting, Turning Off, and Removing Power

Details the proper procedures for safely powering down, restarting, or removing power from the library.

Chapter 7 Encryption Key Management

Configuring Scalar Key Manager (SKM) on the Library

Provides a step-by-step guide to configure SKM, including firmware, license installation, and server settings.

Chapter 9 Installing, Removing, and Replacing Components

Taking ESD Precautions

Outlines essential precautions to prevent static damage to sensitive components during installation procedures.

Installing the Rack Mount Kit (Rail Kit)

Guides users through the process of installing rack mount shelves and rail kits for securing the library in a rack.

Installing the Library In a Rack

Provides detailed steps for physically mounting the library into a rack cabinet, ensuring proper alignment and security.

Chapter 10 Updating Firmware

Updating Library Firmware

Explains how to update library firmware using the Web client, including upgrade and downgrade procedures.

Chapter 11 Troubleshooting

Chapter 12 Working With Cartridges and Barcodes

Related product manuals