Quantum Scalar i80 User Manual

Chapter 5: Advanced Reporting
Automatically E-mailing Advanced Reporting Reports and Logs
130 Quantum Scalar i40 and Scalar i80 User’s Guide
Web Client
1 To view, save, or e-mail the report, select Reports > Log Viewer.
2 Select Media Usage Log from the list of logs and click Next.
Automatically E-mailing Advanced Reporting Reports
and Logs
You can configure the library to automatically e-mail Advanced
Reporting logs and reports to specified recipients on a daily or weekly
basis.
Note: Before the library can send e-mail notifications, you must
configure the library e-mail account. For information on how to
configure the e-mail account, see
Configuring the Library E-
Mail Account on page 76.
You can create up to 20 e-mail recipients. If you want to send the same
recipient a different set of reports, you can enter the same e-mail
address more than once, with different reports selected for each. Each
entry counts as a unique recipient toward the 20 total.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g