Quantum Scalar i80 User Manual

Chapter 4: Configuring the Library
Changing Operator Panel Home Screen View
110 Quantum Scalar i40 and Scalar i80 User’s Guide
Unlocking the I/E is described in Unlocking and Opening the I/E Station
on page 145.
Returning to Default
Home Screen
1 From the alternate home screen, select Menu to return to the
default home screen.
The default home screen is displayed temporarily, however upon
power cycle will display the alternate home screen until reset
permanently.
2 To reset to view the default home screen permanently, select
Setup > System Settings and press Select.
3 Select Alternate Home and press Modify.
4 Select Down and press Apply.
Select Exit twice to return to the default home screen.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g