Chapter 4: Configuring the Library
Adding or Upgrading Licensable Features
Quantum Scalar i40 and Scalar i80 User’s Guide 71
3 On your library, locate the serial number. You will need the serial
number to retrieve your license key from the Web site. To locate the
serial number:
• On the operator panel, select Reports > About Library.
• On the Web client, select Reports > About > Scalar i40/i80.
4 Access the License Key Management Web site: http://
www.quantum.com/licensekeys.
5 Enter the information requested on the screen to obtain your license
key.
You are now ready to apply the license key to the library. See Applying a
License Key on page 71.
Applying a License Key Once purchased, you can apply a license key to the library.
Caution: While you are installing a license key, backup operations
may be interrupted.
Operator Panel
Note: Entering a license key on the operator panel is difficult. It is
recommended that you use the Web client, if possible.
1 Select Setup > License Installation and press Select.
The Current Licenses screen is displayed.
2 Select Add.
The Enter License Key screen is displayed. Five blank digits appear on
the screen. The first digit is highlighted.
3 Use the Up and Down buttons to scroll through the list of letters
and numbers until you reach the letter or number you want. Press
the Right button to advance to the next digit. Repeat for the
remaining digits.
4 When all the digits are entered correctly, press Apply.
5 Press OK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
