Quantum Scalar i80 - Figure 45 Rail Adapter Types

Chapter 9: Installing, Removing, and Replacing Components
Installing the Rack Mount Kit (Rail Kit)
Quantum Scalar i40 and Scalar i80 User’s Guide 235
c Determine the type of rail adapter required for your rack. Each
rail adapter is marked with the specific hole type supported (see
Figure 45).
Figure 45 Rail Adapter Types
Use the rail adapters with
blocks on rails with square
hole patterns
Use the rail adapters with
circle pegs (opposite blocks)
on rails with non-threaded
circle hole patterns
Use the rail adapters with small
circle pegs on rails with threaded
circle hole patterns (M6 on one side
and M5 on the other side)