Quantum Scalar i80 User Manual

Quantum Scalar i40 and Scalar i80 User’s Guide 311
Chapter 11
Troubleshooting
The Scalar i40 and Scalar i80 libraries include advanced system monitoring
and alerting mechanisms that inform you of library status and issues.
The library provides you with status information about various library
subsystems and components. It also notifies you of issues it detects and
guides you through diagnosing and correcting issues before problems
interfere with backups.
This chapter covers:
• About Diagnostic Tickets
• Capturing Snapshots of Library Information
• Troubleshooting Library “Not Ready” Messages
• Retrieving Tape Drive Logs
• Interpreting LEDs
• Running the Installation and Verification Test (IVT)
• Running the IVT Diagnostic Subtests Individually – Robotics, Tape
Drive, and Magazine Tests
• Running the Random Move Test
• Performing Library Diagnostics
• Resetting Factory Defaults

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g