Quantum Scalar i80 User Manual

Chapter 4: Configuring the Library
Setting the Session Timeout
Quantum Scalar i40 and Scalar i80 User’s Guide 97
For example:
ktpass‐outlibrary.keytab‐princlibrary/
delos.dvt.mycompany.com@OURREALM.LOCAL
+rndPass‐ptypeKRB5_NT_SRV_HST‐cryptoRC4‐
HMAC‐NT‐mapUserourrealm.local/computers/
kerbtest
• For Windows 2008:
ktpass‐outlibrary.keytab‐princlibrary/
<fqdnoflibrary>@<realm>
+rndPass‐ptypeKRB5_NT_SRV_HST‐cryptoAES256‐
SHA1
‐mapUser<realm>/computers/<computeraccount>
For example:
ktpass‐outlibrary.keytab‐princlibrary/
delos.dvt.mycompany.com@OURREALM.LOCAL
+rndPass‐ptypeKRB5_NT_SRV_HST‐cryptoAES256‐
SHA1
‐mapUserourrealm.local/computers/kerbtest
Setting the Session Timeout
The library automatically logs out a user or administrator when the
library has detected no activity for a specified length of time. This
always occurs on the Web client, and will occur on the operator panel if
passwords are enabled (see
Enabling and Creating Passwords on the
Operator Panel on page 84). The default session timeout is 15 minutes.
You can change that to 30, 45, or 60 minutes. You can only change this
setting on the operator panel.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g