Chapter 6: Performing Library Operations
Logging In
136 Quantum Scalar i40 and Scalar i80 User’s Guide
Logging In
All users, service users, and administrators must log in to the library to
perform library functions or view library operations. (Exception: If
passwords are not configured on the operator panel, login to the
operator panel is not required.)
Simultaneous Logins Multiple users can be logged in to the library at the same time. The
same user can be logged from multiple locations. Note that multiple
users logged in from different locations cannot make changes to
configuration settings or perform certain library functions
simultaneously. The screens are visible, but access is denied. Whichever
one is logged in first has access to the screen until they exit the screens.
Logging in for the First
Time
When you first boot up the library, the operator panel does not require
you to log in. (In fact, if you do not configure passwords for the
operator panel, you never need to log in to the operator panel; see
Enabling and Creating Passwords on the Operator Panel on page 84 for
more information.)
To log in to the Web client for the first time:
1 Make note of your library’s IP address. From the operator panel,
select Reports > Network Settings to display the IP address.
2 Enter the IP address in your Internet browser to bring up the Web
client login screen.
3 Enter the default user name and password:
• Default user name: admin
• Default password: password
4 Click OK.
After you log in for the first time, change the password for the default
admin account. See
Modifying Local User Accounts on the Web Client
on page 83.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
